Crane Mats for Energy & Infrastructure Projects: Wind Farms, Data Centers, and More
Key Takeaways Wind, solar, data centers, transmission, and pipeline work all need ground protection, but they need different specs, because the ability to support loads and site duration vary sharply by project type and ground bearing conditions. Wind turbine erection is one of the heaviest crane-mat load classes in construction, while solar and data center […]
New vs Used Crane Mats: What Buyers Should Consider
Key Takeaways Used mats look cheaper on the invoice; remaining service life, unknown species, and hidden wear determine whether they actually are. Rental is a legitimate third option that most new-versus-used comparisons skip entirely. Cost per mat-month, not purchase price, is the only number that tells you the truth across new, used, and rental paths. […]
Buying Crane Mats: Key Questions to Ask Your Supplier
u Key Takeaways A quote gives you a size and a price; it does not give you species, grade, material strength, or verified dimensions unless you ask directly. The right questions surface risk before the PO is signed, not after a mat fails on a live lift. A supplier who answers clearly and specifically is […]
Crane Mat Costs: What Factors Affect the Price?
Key Takeaways Purchase price is driven by species, grade, true dimension, material strength, hardware, and origin, not just size on a spec sheet; a mat is not a mat. Freight and lead time move the real number as much as the mill price does, even when a quote lists them separately. The purchase price tells […]
How to Choose the Right Crane Mat Size for Your Project
Ask a supplier for “the right size crane mat,” and you’ll usually get one number back: 20’x4’x12″. That’s a mistake. But mat size without knowing your load, your mat, and your ground conditions is worthless. Get one of the three wrong and the other two don’t save you. This guide is the practical follow-up to […]
Crane Mats Guide: Species, Thickness, Load Ratings, and Cost
Crane Mats Guide: Species, Thickness, Load Ratings, and Cost A crane set up on the wrong surface doesn’t lose you a day. It loses you the crane, and maybe a lot worse. Crane supports, whether crane mats or outrigger pads, can sink, shift, or exceed what the ground beneath them can bear, and any one […]
Timber Mat Types: Pros and Cons Compared
There’s no single “best” timber mat type. Anyone who tells you otherwise is usually selling one specific product. What you actually have are trade‑offs between oak, mixed hardwood, and Eucalyptus mats, and the right choice depends on your site conditions, project length, equipment loads, and total cost over time—not on which material happens to have […]
Timber Mat Thickness & Sizing by Type
Ask five suppliers what size a “typical” timber mat is, and you’ll likely get five slightly different answers. That’s part of the problem. Thickness and sizing aren’t just what a vendor tells you; they determine how much load a mat can carry, how long it survives on your site, and whether what you’re buying is […]
Timber Mats Weight Capacity by Type
“Weight capacity” is the number every buyer searches for. It’s also not a real engineering term. Engineers work with two separate properties: bending strength, or modulus of rupture (MOR), measured in PSI, and ground bearing capacity, the ground’s ability to hold equipment without failing under it. OSHA’s ground conditions standard, 1926.1402, treats these as distinct […]
How to Choose the Right Timber Mat Type for Your Project
Most buyers start this decision backwards. They ask, “Which timber mat is the best?” when the real question is, “Which timber mat is best for what my project actually needs?” A mat that performs perfectly on a dry, six-week construction job can fail fast on a wetland pipeline route that runs for three years. The […]